Make Sure Your Glasses Can Use GlassOn
​​Print this measurement guide and follow the instructions.
Find out if your glasses can benefit from GlassOn,
Step 1: Apply
Apply GlassOn to area beside your hinges.
Try to apply the padding as low as possible.
Start with "Standard" pads, but feel free to swap it with the "Thin" pads if the glasses feel too tight.
Allow for 1 week to let the paddings mold properly.
Step 2: Trim
Trim excess materials using provided clippers.
Discard the excess materials.
Step 3 (Optional) : Stack
If you want to make the glasses more snug, you can stack a GlassOn padding on top of existing ones on your glasses.
Try stacking it to only one side of the glasses first and see if the glasses are snug enough.
Wait a week to allow for the paddings to mold.
​​
It is recommended to stack using "Thin" paddings first before using the "Standard".
If your glasses feels too tight, remove the paddings you just applied or swap existing ones with "Thin" padding.
​​​
Using GlassOn In 3 Steps​​​​​​​
Maintenance Tips
How To Fix Paddings Sliding Out?
Some
You can remove then reattach said padding to your glasses.
The glue and pressure will keep the padding in place.
You can also try to put the padding as low as possible, as long as it does not stick out from your glasses frame.
